lørdag den 28. december 2013
tirsdag den 24. december 2013
tirsdag den 17. december 2013
mandag den 16. december 2013
Info wanted..
My friend Kludder is looking for more info about this scoot, Swedish?
Can anyone help..?
tirsdag den 10. december 2013
mandag den 9. december 2013
torsdag den 5. december 2013
New front...
A little change for next season...
Away with covers and front fender.
On with Avon Speedmaster MK II, 2 inch + fork tubes, fork boots...
onsdag den 4. december 2013
tirsdag den 3. december 2013
fredag den 29. november 2013
tirsdag den 26. november 2013
.jpg)
lørdag den 23. november 2013
Pangea Bird Deflector for the CV...
Pure Flash Gordon Bird Deflector from Pangea Speed, thanks to Vintique Cycles ...
fredag den 22. november 2013
Show Class Magazine Presents Flyin' High...
Show Class Magazine Presents Flyin' High
- 10-21-2013
- Categorized in: Motorcycles, News
Words By Bram
Photos by Jelle and Bram
The bike was originally bought by a shop owner as a basketcase 10 ago. He rebuilt it completely and sold it to a girl that only rode it around the church and took actually good care of it. I bought this bike 4 years ago from her because she needed the money, stripped and changed it a bit and rode it like that for 2 summers. In the mean time gathering ideas & stuff for the big change.Had a tight plan which changed a lot throughout the build : different front end (the 33mm 4” over being a little bit fucked), tank, handlebars, oiltank, etc.
I ran in some trouble with the frame but that worked out pretty fine thanks to the guys from Iron Pit. Got the frame back, put the engine in (which didn’t need any work and hasn’t since), rewired it, mounted everything else, started it and rode it as much as I could. This summer I rode it to Germany, Denmark, Sweden (Jokers show), France and the UK (The Trip Out) without any problems!
Thanks to everybody that helped me out: Iron Pit, Sam (STC), Jelle
Specs:
’75 Ironhead XLCH
Stock frame w/ custom made weld-on by Iron Pit (no stretch or drop)
Custom oiltank, exhausts & loads of other details by Iron Pit
Stock 35mm front end w/ 21” Avon
18” rear Dunlop K70
Stock lights
Modified ironhead rear fender
Cheap tri-dent sissybar
Cheap reproduction seat & p-pad
Frisco style gastank
Rattlecan paint job
Be sure to grab Issue 15 now!
.jpg)
tirsdag den 19. november 2013
Jamesville’s 1948 Harley Panhead - Bike Exif...
Jamesville’s 1948 Harley Panhead
James Roper-Caldbeck is English, lives in Denmark, and builds custom Harley-Davidsons. It sounds like a League of Nations recipe for disaster, but fear not—James has an amazingly good eye for stance and proportions.
This long, low Panhead is James’ latest creation, a ground-up build for a customer from Romania. Panhead customs are two-a-penny, but as you can see, this one is a level above the norm.
“About a year ago I had a custom Evo Sportster featured on Bike EXIF,” James explains, “and a gentleman named Andrei fell in love with the bike. He emailed me simply saying ‘I want one,’ but unfortunately he now lives in Germany—where strict rules make it impossible to register a bike like that.” Instead, James decided to build a 1948 Panhead.
The starter bike was in bad shape, but when it arrived in James’ Copenhagen workshop, it was in good hands. James rebuilt the engine and brakes, and replaced every bushing and bearing on the whole machine—from the forks to the wheels. The original Harley frame had been butchered too, with 36 holes drilled into it, so James re-welded it and cleaned it up to better-than-factory spec.
“After that (and a whole lot more) was done, the fun could begin,” he recalls. “I fabricated a new set of bars from the old ones—which were so wide, I couldn’t get them through my shop door!” The 3½ gallon tanks were narrowed, then pulled back and raised on the frame. James also made a blanking panel out of aluminum, which now houses the ignition switch and warning lights.
The rear fender is a reconfigured 1930s Ford spare wheel cover, and James built a mini sissy bar to hold the vintage rear light. Straight exhaust pipes are hooked up to trumpet-style mufflers, which reportedly sound glorious. The foot controls and brake brackets were de-chromed and Parkerized, a process that was used on metal parts before chroming was available.
The final touches were to convert the Panhead to a foot clutch with a police-style shifter, and chop down the original seat pan and cover it with tan leather from an old suitcase.
Once the fabrication was finished, it was time for the paint. Andrei chose petroleum blue, a deep and lustrous shade that’s difficult to replicate in photographs. Then James rewired the whole bike using vintage-style cloth wiring.
The first time Andrei saw the bike was when he visited James’ shop to collect it. “We didn’t really email or talk on the phone that much,” James reveals. “He said he trusted me to build him his dream bike, and he did not want to interfere. I would like to thank him for letting me do so.”
A smart move on Andrei’s part—and amply rewarded with one of the most beautiful Panheads we’ve ever seen.
Head over to the Customs From Jamesville website for more classic Harley builds. James Roper-Caldbeck is one of the featured builders in the book The Ride—which you can order here.
fredag den 15. november 2013
torsdag den 14. november 2013
tirsdag den 12. november 2013
fredag den 8. november 2013
tirsdag den 5. november 2013
mandag den 4. november 2013
Harley-Davidson 883 by TJ Moto...
It isn’t everyday we get an email from a new custom motorcycle builder based in India, despite the fact that the country has a billion-plus residents and an enormous motorcycle culture – most of the more creative Indian customs don’t make it beyond the country’s borders. That said, I think this bike is destined to be an exception.
It was built by Tushar Jaitly, the owner and head builder at TJ Moto based out of Delhi. Tushar just graduated from an automotive design school in Italy, he moved back to Delhi to begin to apply his newly acquired skills to a line of unique, handcrafted motorcycles. This bike, called Nadia, is his first creation. It was completed at the end of September this year and if first impressions are anything to go by, I think this motorcycle might just launch him to the forefront of the Indian custom motorcycle scene.
Click here to Like Silodrome on Facebook and never miss another story.
Nadia is based on a Harley-Davidson 883, though most of the original bike has been removed and replaced with new components. In fact, Tushar only really carried over the down-tube, engine and engine mounts from the original motorcycle. A new hard-tail frame was fabricated with an interesting top tube that runs over the fuel tank, giving it an almost board-tracker look.
Firestone Deluxe Champion tires were added front and back and the fenders were removed, a new sprung seat was added and a fuel tank was handmade to slot in between the top tube and the engine. Once all the major work was done, Tushar settled on a British racing green paint job and then set it off with leather and brass accents, giving the bike a timeless, almost steampunk feel.
I suspect that we’re going to see a lot more from Tushar over the coming years, in the meantime if you’d like to stay up to date with the new creations from TJ Moto, you can click here to Like their Facebook Page or visit his website here.
http://silodrome.com/harley-davidson-custom-883/
Abonner på:
Opslag (Atom)